BH-485-DO 0~20ppm Digital Online RS485 Modbus Dissolved oxygen sensor

BH-485-DO  polarography type dissolved oxygen sensor,it's also called as Digital dissolved oxygen sensor ,because it's with standard RS485 Modbus,power is 24VDC.

if any questions pls contact email: michael@shboqu.com, mob/whatsapp:86-15000087545



评论

发表评论

此博客中的热门博文

Digital RS485 Modbus or 4-20mA output Residual Chlorine Sensor

图片
Digital RS485 Modbus or 4-20mA output Residual Chlorine Sensor New Residual Chlorine Sensor, it can be directly with RS485 Modbus or 4-20mA output.max pressure is 3bar indicator Free chlorine reduced dependence on pH Application e. g. Swimming pool water, drinking water, sea water Surfactants (tensides) are partially tolerated. Chlorination agents inorganic chlorine compounds: NaOCl (=sodium hypochlorite), Ca(OCl) 2 , chlorine gas, electrolytically generated chlorine Measuring system Membrane covered, amperometric potentiostatic 3-electrode system with electronic inside Electronic Analog   version: - voltage   output -  not galvanically isolated   electronics -  analog internal data   processing -  output signal: analog (analog-out/analog) Digital   version: - electronic is completely galvanically   isolated -  digital internal data processing -  output   signal: analo...
阅读全文

BD200 Industrial 0~20.0mg/L Dissolved Oxygen Module with 4-20mA

图片
BD200 Industrial 0~20.0mg/L Dissolved Oxygen Module with 4-20mA BD 2 00-type industrial online dissolved oxygen  transmitter is tour company for high-temperature pharmaceutical   and chemical fields such as interference in the development of a more transmission module, with a small   size, accurate measurement, high anti-interference ability etc advantage.   Technical Indexes Parameter Dissolved oxygen 0.00-20.0mg/L / 1%FS 0.0 - 300% / 1%FS Temperature compensation NTC22K, (＞80℃, output 0) 4-20mA 4.00-20.00mA/±0.1mA Power supply 24VDC (20-36VDC no positive and negative) Calibration Two point Installation model 35mm standard rail installation Working condition 0-60℃, related humidity <85% (without condensation)
阅读全文

BOD-BQ Industrial BOD Analyzer

Measure method : Spectrophotometric colorimetric method Measure range : （ 0 -200 ） mg/l, （ 0-500 ） mg/l, （ 0 -1000 ） mg/l   Three optional measure range Detection limit : 5 mg/l Resolution ratio:    <1mg/l Accuracy : Standard solution <5%; water sample <10% Degree of reproducibility :   < 5% Digestion temperature : 165℃, can set Digestion time ： 15min ， can set Non-failure operation time : ≧720h/time Span Drift : ±5%F.S. Sample interval : Continuous, 1 hours, 2 hours... 24 hours, trigger, the whole point Calibration interval : Manually or automatically according to the selected interval and time (1-7 days) Cleaning interval : Manually or automatically according to the selected interval and time (1-7 days) . Maintenance interval : 〉 1 month , about 1 hour each time ...
阅读全文