O3-2059 Industrial Dissolved Ozone Analyzer

    O3-2059 Industrial Dissolved Ozone Analyzer

O3-2059 is a total new industrial dissolved ozone analyzer, with high intelligence, sensitivity. It can measure dissolved ozone and temperature simultaneously. It is widely used in such industries as thermal power plant, running water, pharmaceutical, drinking water, water purification, industrial pure water, swimming pool disinfection residual chlorine continuous monitoring.
Feature
①Measurement principle: constant pressure
②Large LCD screen

③Several parameters display at the same time: Dissolved ozone values,Temperature value,current and has range transfinite tip.
④Has function of backing to factory setting.
⑤Manual/automatic temperature compensation
⑥Isolation 4-20mA output
Technical Indexes
1. Measuring range: Dissolved ozone values:0-20mg/L or 0-2 mg/L; Temp:0-60℃ 2.Resolution:0.01mg/L,0.1℃
3.Precision:better than ±1% or±0.01mg/L,±0.5℃
4. Manual/automatic temperature compensation（0-60℃）
5.The control interface: two groups of ON/OFF relay contact, divided into high and low alarm signal photoelectric isolation output. The third group relay: automatic cleaning control function analog output.
6. Signal isolation output: photoelectric coupler isolation protection 4 ~ 20mA signal output.
7. The electric apparatus: relay lag quantity any setting, relay load 3 A 220 vac/24 VDC.
8.Working conditions: environmental temperature is 0 ~60℃, relative humidity 90% or less
9.The output load: load < 500 Ω (0-10 ma), load < 750 Ω (4 -20ma)
10.Working voltage: 220 vac plus or minus 10%, 50/60 Hz
11.Feet inches: 96 x 96 x 156 mm
12.Open hole size: 91 x 91mm
13.Heavy volume: 0.9 Kg
14.The protection level: IP65

评论

发表评论

此博客中的热门博文

SJG-2083C INDUCTIVE ACID ALKALI CONCENTRATION METER

图片
SJG-2083C   INDUCTIVE ACID ALKALI CONCENTRATION METER SJG-2083C is inductive type acid alkali concentration meter,it's with inductive conductivity sensor,the measuring principle of the infinite sensor is a pair of wirewound alloy toroidal coils. The probe of the sensor is completely isolated from the measured process solution (non-contact). Two coils, one for transmitter and the other for receiver. When the transmitter coil is energized, the electrolyte solution conducts electricity and generates an induced current, which is directly proportional to the conductivity of the solution. The receiver coil detects the magnitude of this current and thus obtains the conductivity value of the solution. Conductivity probe alloy toroidal coil is customized in the toroidal molding with corrosion resistance. Because the probe of the sensor is completely isolated (non-contact) from the process under test (liquid), frequent maintenance and maintenance are not required.
阅读全文

CODS-3000-1 DIGITAL RS485 COD SENSOR

图片
CODS-3000-1  DIGITAL RS485 COD SENSOR Measuring Principle     The BOQU Digital Online COD Sensor is based on the absorption of ultraviolet light by organic matter, and uses the 254 nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of soluble organic matter content in water, and can be converted into COD value under certain conditions. This method allows for continuous monitoring without the need for any reagents. Application 1)Continuous monitoring of organic matter load in the sewage treatment process 2)0n-line real-time monitoring of  influent and outflow water of the wastewater treatment 3)Application:surface water, industrial discharge water, and fishery discharge water etc
阅读全文

AH-800 Online Water Hardness and Alkali Analyzer

图片
Online W ater H ardness /Alkali   A nalyzer Model:AH-800 Online Water hardness and Alkali analyzer monits water total hardness or carbonate hardness and   total alkali  fully automatically via titration. Description Th is   analyzer  can measure water total hardness or carbonate hardness  and total alkali fully automaticlly via titration. This instrument is suitable for recognising levels of hardness, quality control of water softening facilities and monitoring of water blending facilities. The instrument allows two different limit values to be defined and checks the water quality by determining the absorbtion of the sample during titration of the reagent. The configuration of the many applications is supported by a configuration assistant. Features ◇ Reliable, exact and fully automatic analysing ◇ Simple commissioning with configuration assistant ◇ Self calibrating and self monitoring ◇ High measuring accuracy ◇ Easy maintenance and cleaning. ◇ Minimal reagent
阅读全文