DDG-3080 and DDG-2090 Online Water Conductivity Meter

DDG-3080 and DDG-2090 Online Water Conductivity Meter
DDG-3080 Conductivity Meter
DDG-2090 Conductivity Meter.
Both is with 4-20mA, RS485 and 2 relays.
The measuring range ,pls check detaisl in catalog.
Contact email: michael@shboqu.com, mob/whatsapp:86-15000087545

评论

发表评论

此博客中的热门博文

AH-800 Online Water Hardness and Alkali Analyzer

图片
Online W ater H ardness /Alkali   A nalyzer Model:AH-800 Online Water hardness and Alkali analyzer monits water total hardness or carbonate hardness and   total alkali  fully automatically via titration. Description Th is   analyzer  can measure water total hardness or carbonate hardness  and total alkali fully automaticlly via titration. This instrument is suitable for recognising levels of hardness, quality control of water softening facilities and monitoring of water blending facilities. The instrument allows two different limit values to be defined and checks the water quality by determining the absorbtion of the sample during titration of the reagent. The configuration of the many applications is supported by a configuration assistant. Features ◇ Reliable, exact and fully automatic analysing ◇ Simple commissioning with configuration assistant ◇ Self calibrating and self monitoring ◇ High measuring accuracy ◇ Easy maintenan...
阅读全文

BH-485-pH Digital 12 or 24VDC Online pH sensor with RS485 communication

图片
BH-485-pH Digital 12 or 24VDC Online pH sensor ■  Summary BH-485   Series of online pH electrode, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability, long lifetime , with rapid response, low maintenance cost, real-time online measurement  characters etc. . The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can very convenient access to sensor networks. If any questions pls contact : michael@shboqu.com ■   F eatures · The characteristics of industrial sewage electrode, can work stably for a long time · Built in temperature sensor, real-time temperature compensation · RS485 signal output, strong anti-interference ability, the output range of up to 500 m · Using the standard Modbus RTU (485) commu...
阅读全文

PHG-2081X Industrial ph and ORP Meter

图片
PHG-2081X Industrial ph/ORP Meter Attention Please read the following instructions for safe operation before use. 1. Please observe whether the appearance of the instrument is damaged by the squeeze of the transport ation  before use. 2. Read the operating manual before use to avoid incorrect wiring . 3. After all wiring is completed, it must be checked carefully before sending power and confirming that the connected equipment is correct. 4. Please avoid the high temperature, high humidity and corrosive environment, and avoid direct sunlight. 5. Avoid using power supplies that cause surge interference. If there is surge interference, please separate the power supply of the instrument from other power sources. Introduction Instrument for industrial pH/mV ORP and temperature measurement , such as Waste water, drinking water environmental monitoring, fermentation, food production process  etc. Instrument for panel mounted,wall mounted,pipe mounted....
阅读全文