PHG-216 Industrial pH Meter

PHG-216 Industrial pH Meter
PHG-216 Industrial pH Meter is an accurate instrument used for industrial on-line measurement and PH control.The instrument is easy to install and use, operates safely, has a strong adaptability to the environment, and requires little maintenance.

PHG-216 Industrial pH Metert has the following main characteristics:
1) three-point calibration, automatic identification of solutions.
2) Provided with the functions of outputting PH maximum and minimum alarm relay control function and setting alarm return difference.
3) Output of insulated 4～20mA current loop.
4) PH value and Temperature shift function
5) Power EMC anti-jamming circuit function.
Technical Indexes
1. Measurement range: 0.00～14.00pH
2. Resolution ratio: 0.02PH
3.Accuracy: ±0.1pH
4. Displaying mode:3½-digit apheliotropic liquid crystal display
5.Calibrating mode:Three-point calibration (automatic identification of solutions)
6. Manual temperature compensation: 0～120℃
7. Auto temperature compensation: 0～120℃ (Temperature resistance, NTC10K)
8. Temperature of measured solutions: 0～120℃
9. Compression resistance of electrodes: 0～0.5MPa
10. Measurement distance: standard configuration 10m(≤40m)
11. Output current: insulated 4～20mA（≤500Ω）
12. Control output: maximum and minimum (constantly open) contact point output
13. Capacity of contact points: 3A/AC250V (with resistant loads)
14. ower supply: AC 220V±10% 50Hz,  AC 110V±10% 50Hz √
15. Environmental conditions: humidity: ≤85%/RH; without strong electromagnetic
                           interference except earth magnetic field
16. External dimensions: 48×96×100mm (height×width×depth)
17. The hole on the dial plate: 45×91mm
18. Installation mode: Panel Installation
if any questions about PHG-216 Industrial pH Meter, pls contact michael@shboqu.com

评论

发表评论

此博客中的热门博文

SJG-2083C INDUCTIVE ACID ALKALI CONCENTRATION METER

图片
SJG-2083C   INDUCTIVE ACID ALKALI CONCENTRATION METER SJG-2083C is inductive type acid alkali concentration meter,it's with inductive conductivity sensor,the measuring principle of the infinite sensor is a pair of wirewound alloy toroidal coils. The probe of the sensor is completely isolated from the measured process solution (non-contact). Two coils, one for transmitter and the other for receiver. When the transmitter coil is energized, the electrolyte solution conducts electricity and generates an induced current, which is directly proportional to the conductivity of the solution. The receiver coil detects the magnitude of this current and thus obtains the conductivity value of the solution. Conductivity probe alloy toroidal coil is customized in the toroidal molding with corrosion resistance. Because the probe of the sensor is completely isolated (non-contact) from the process under test (liquid), frequent maintenance and maintenance are not required.
阅读全文

CODS-3000-1 DIGITAL RS485 COD SENSOR

图片
CODS-3000-1  DIGITAL RS485 COD SENSOR Measuring Principle     The BOQU Digital Online COD Sensor is based on the absorption of ultraviolet light by organic matter, and uses the 254 nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of soluble organic matter content in water, and can be converted into COD value under certain conditions. This method allows for continuous monitoring without the need for any reagents. Application 1)Continuous monitoring of organic matter load in the sewage treatment process 2)0n-line real-time monitoring of  influent and outflow water of the wastewater treatment 3)Application:surface water, industrial discharge water, and fishery discharge water etc
阅读全文

AH-800 Online Water Hardness and Alkali Analyzer

图片
Online W ater H ardness /Alkali   A nalyzer Model:AH-800 Online Water hardness and Alkali analyzer monits water total hardness or carbonate hardness and   total alkali  fully automatically via titration. Description Th is   analyzer  can measure water total hardness or carbonate hardness  and total alkali fully automaticlly via titration. This instrument is suitable for recognising levels of hardness, quality control of water softening facilities and monitoring of water blending facilities. The instrument allows two different limit values to be defined and checks the water quality by determining the absorbtion of the sample during titration of the reagent. The configuration of the many applications is supported by a configuration assistant. Features ◇ Reliable, exact and fully automatic analysing ◇ Simple commissioning with configuration assistant ◇ Self calibrating and self monitoring ◇ High measuring accuracy ◇ Easy maintenance and cleaning. ◇ Minimal reagent
阅读全文