ZDYG-2088Y 0~100 NTU,500 NTU,3000NTU 24V Online Auto Clean Turbidity Sensor with 4-20mA

ZDYG-2088Y 0~100 NTU,500 NTU,3000NTU 24V Online Auto Clean Turbidity Sensor with 4-20mA

If any questions pls contact : michael@shboqu.com
Online turbidity sensors for on-line measurement of scattered light suspended in the degree of opaque liquid insoluble particulate matter produced by the body and can quantify levels of suspended particulate matter. Can be widely used in site online turbidity measurements, the power plant, pure water plants, sewage treatment plants, beverage plants, environmental protection departments, industrial water, wine industry and the pharmaceutical industry, epidemic prevention departments, hospitals and other departments.


Features of online turibidity sensor
1. Check and clean window every month, with automatic cleaning brush, brush a half hour
2. Adopt sapphire glass realize easy maintain, when cleaning adopt scratch-resistant sapphire
glass, don’t worry about the wear surface of window.
3. Compact, not fussy installation place, just put in to can complete the installation
4. Continuous measurement can be achieved, built-in 4~20mA analog output, can transmit data to
the various machine according to the need.
5. Wide measurement range, according to different needs, providing 0-100 degrees, 0-500
degrees, 0-3000 degrees three optional measurement range.

Technical Indexes: 
1. Measuring range: turbidity sensor: 0~100 NTU, 0~500 NTU, 3000NTU
2. Inlet pressure: 0.3~3MPa 
3. Suitable temperature: 5~60℃
4. Output signal: 4~20mA
5. Features: Online measurement, good stability, free maintenance
6. Accuracy: <FS (Full scale) ± 2%
7. Reproducibility: <FS± 1%
8. Resolution: 0.01NTU
9. Hourly drift: <0.1NTU
10. Relative humidity: <70％RH
11. The power supply: 12V
12. Power consumption: <25W
13. Dimension of the sensor: Φ 32 x163mm (Not including the suspension attachment)
14. Weight: 1.5kg
15. Sensor material: 316L stainless steel
16.Deeppest depth：Underwater 2meters

评论

发表评论

此博客中的热门博文

SJG-2083C INDUCTIVE ACID ALKALI CONCENTRATION METER

图片
SJG-2083C   INDUCTIVE ACID ALKALI CONCENTRATION METER SJG-2083C is inductive type acid alkali concentration meter,it's with inductive conductivity sensor,the measuring principle of the infinite sensor is a pair of wirewound alloy toroidal coils. The probe of the sensor is completely isolated from the measured process solution (non-contact). Two coils, one for transmitter and the other for receiver. When the transmitter coil is energized, the electrolyte solution conducts electricity and generates an induced current, which is directly proportional to the conductivity of the solution. The receiver coil detects the magnitude of this current and thus obtains the conductivity value of the solution. Conductivity probe alloy toroidal coil is customized in the toroidal molding with corrosion resistance. Because the probe of the sensor is completely isolated (non-contact) from the process under test (liquid), frequent maintenance and maintenance are not required.
阅读全文

CODS-3000-1 DIGITAL RS485 COD SENSOR

图片
CODS-3000-1  DIGITAL RS485 COD SENSOR Measuring Principle     The BOQU Digital Online COD Sensor is based on the absorption of ultraviolet light by organic matter, and uses the 254 nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of soluble organic matter content in water, and can be converted into COD value under certain conditions. This method allows for continuous monitoring without the need for any reagents. Application 1)Continuous monitoring of organic matter load in the sewage treatment process 2)0n-line real-time monitoring of  influent and outflow water of the wastewater treatment 3)Application:surface water, industrial discharge water, and fishery discharge water etc
阅读全文

AH-800 Online Water Hardness and Alkali Analyzer

图片
Online W ater H ardness /Alkali   A nalyzer Model:AH-800 Online Water hardness and Alkali analyzer monits water total hardness or carbonate hardness and   total alkali  fully automatically via titration. Description Th is   analyzer  can measure water total hardness or carbonate hardness  and total alkali fully automaticlly via titration. This instrument is suitable for recognising levels of hardness, quality control of water softening facilities and monitoring of water blending facilities. The instrument allows two different limit values to be defined and checks the water quality by determining the absorbtion of the sample during titration of the reagent. The configuration of the many applications is supported by a configuration assistant. Features ◇ Reliable, exact and fully automatic analysing ◇ Simple commissioning with configuration assistant ◇ Self calibrating and self monitoring ◇ High measuring accuracy ◇ Easy maintenance and cleaning. ◇ Minimal reagent
阅读全文